91066-041.0-Bid tabulation(PDF, 13KB)
91066-041.0-Attendance(PDF, 22KB)
91066-041.0-Attachment A(PDF, 195KB)
91066-041.0-Attachment B(PDF, 195KB)
91066-041.0-Attachment C(PDF, 195KB)
91066-041.0-bid document(PDF, 1MB)
91066-041.0-Distribution List(PDF, 42KB)
SCOPE OF WORK
The reroof project is located at 1415 Harrison Street. Kalamazoo, MI 49048. Marcus Kiste, Project Manager/Coordinator, is the Owner’s Representative and may be contacted regarding any questions or for a pre-bid job site inspection, by phone at (616) 252-9276. The project consists of installing Carlisle’s Sure-Seal (black) Adhered Roofing System as outlined below: Remove the Ballast, membrane, and existing insulation. Install Polyisocyanurate to meet R-30. Install tapered drain sump. Apply the new Fully Adhered EPDM and install new edge metal following manufacturer specifications. (See Attachment A)
The reroof project is located at 1415 Harrison Street. Kalamazoo, MI 49048. Marcus Kiste, Project Manager/Coordinator, is the Owner’s Representative and may be contacted regarding any questions or for a pre-bid job site inspection, by phone at (616) 252-9276. The project consists of installing Carlisle’s Sure-Seal (black) Adhered Roofing System as outlined below: Remove the Ballast and existing membrane. Fasten down Polyisocyanurate to meet R-30. Apply the new Fully Adhered EPDM and install new edge metal. (See Attachment B)
The reroof project is located at 1415 Harrison Street. Kalamazoo, MI 49048. Marcus Kiste, Project Manager/Coordinator, is the Owner’s Representative and may be contacted regarding any questions or for a pre-bid job site inspection, by phone at (616) 252-9276. The project consists of installing Carlisle’s Sure-Seal (black) Adhered Roofing System as outlined below: Remove the existing roof down to the concrete deck. Apply the new Fully Adhered EPDM and tapered Polyisocyanurate to meet an average R-30. (See Attachment C)
Provide all labor, material, tools, equipment, and supervision necessary to complete the installation of a Sure-Seal 60 mil EPDM membrane Fully Adhered Roofing System including flashings and insulation as specified herein and as indicated on the drawings in accordance with the manufacturer’s most current specifications and details.
The roofing contractor shall be fully knowledgeable of all requirements of the contract documents and shall make themselves aware of all job site conditions that will affect their work.
The roofing contractor shall confirm all given information and advise the building owner, prior to bidding, of any conflicts that will affect their cost proposal.
Any contractor who intends to submit a bid using a roofing system other than the approved manufacturer must submit for pre-qualification in writing fourteen (14) days prior to the bid date. Any contractor who fails to submit all information as requested will be subject to rejection. Bids stating “as per plans and specs” will be unacceptable.
The bidder shall have all work completed by October 31, 2025